Removing the ball coupling
- Observe the manufacturer's installation instructions.
- Press the protective cap into the ball coupling recess.
- Make sure that the protective cap is firmly in place.
See also:
Checking the coolant level
Only check the coolant level when the vehicle
is on a level surface and the engine has cooled
down.
Turn the SmartKey to position
2 in the ignition lock.
On vehicles with KEYLESS-GO, press th ...
Resetting triggered NECK-PRO head restraints
WARNING
For safety reasons, have the NECK-PRO head restraints checked at an authorized
Mercedes-Benz Center after a rear-end collision.
WARNING
When pushing back the NECK-PRO head restr ...
Vehicles without extended Off-Road Proengineering package
Basic setting
The extent to which the vehicle is raised or
lowered depends on the basic setting
selected.
Select:
• Raised level, for driving on normal
off-road
terrain
• Highway/high-speed ...