Instrument cluster
Selecting the unit of measurement for distance
The Display Unit Speed-/Odometer:
function allows you to choose whether
certain displays appear in kilometers or miles.
The selected unit of measurement for
distance applies to:
- the digital speedometer in the Trip menu
- the odometer and the trip odometer
- the trip computer
- the current consumption and the range
- the navigation instruction in the Navi menu
- DISTRONIC PLUS
- ASSYST PLUS service interval display
– Press the or
button on the
steering wheel to select the Settings
menu.
– Press the or
button to select the
Instr. cluster submenu.
– Press the button to confirm.
– Press the or
button to select the
Display Unit Speed-/Odometer
function.
You will see the selected setting: km or
miles.
– Press the button to save the
setting.
Selecting the permanent display function
The Permanent Display: function allows you to choose whether the multifunction display always shows the outside temperature or the speed in km/h (USA) or mph (Canada).
– Press the or
button on the
steering wheel to select the Settings
menu.
– Press the or
button to select the
Instr. cluster submenu.
– Press the button to confirm.
– Press the or
button to select the
Permanent display function.
You will see the selected setting Outside
Temperature or Speedometer [km/h]:.
– Press the button to save the
setting.
See also:
Problems with PARKTRONIC
Problem
Possible causes/consequences and - Solutions
Only the red segments
in the PARKTRONIC
warning displays are lit.
You also hear a warning
tone for approximately ...
ATA (Anti-Theft Alarm system)
A visual and audible alarm is triggered if the
alarm system is armed and you open:
• a door
• the vehicle with the mechanical key
• the tailgate
• the hood
The alarm is not switched off, even if ...
Blind Spot Assist
Important safety notes
Blind Spot Assist uses a radar sensor system
to monitor the areas on both sides of your
vehicle. It supports you from speeds of
approximately 20 mph (30 km/h). A warning ...