Decoupling a trailer
WARNING
Do not disconnect a trailer with an engaged overrun brake. Otherwise, your hand could become trapped between the bumper and trailer drawbar.
Do not disconnect a trailer with an engaged overrun brake. Otherwise, your
vehicle could be damaged by the rebounding of the overrun brake.
- Make sure that the automatic transmission is set to position P.
- Apply the vehicle's parking brake.
- Close all doors and the tailgate.
- Apply the trailer's parking brake.
- Remove the trailer cable and decouple the trailer.
See also:
Activating/deactivating the residual
heat function
The residual heat function is only available in
Canada
It is possible to make use of the residual heat
of the engine to continue heating the
stationary vehicle for up to 30 minutes after
the ...
Useful information
This Operator's Manual describes all
models and all standard and optional
equipment of your vehicle available at the
time of publication of the Operator's
Manual. Country-specific differences are ...
Emergency Tensioning Devices, belt force limiters
The front seat belts and the outer seat belts
in the rear are equipped with ETDs and seat
belt force limiters.
The ETDs tighten the seat belts in an accident,
pulling them close against the bod ...