Automatic headlamp mode

To switch on automatic headlamp mode: turn the light switch to or or SmartKey in position 1 in the ignition lock:.

SmartKey in position 1 in the ignition lock:

the parking lamps are switched on or off automatically depending on the brightness of the ambient light.

With the engine running: depending on the brightness of the ambient light, the daytime running lamps or the low-beam headlamps are switched on or off automatically.

When the low-beam headlamps are switched on, the the indicator lamp in the instrument cluster lights up.

WARNING
If the light switch is set to or , the or low-beam headlamps will not come on, the low-beam headlamps will not come on automatically if it is foggy. This could endanger you and others. Therefore, turn the light switch to The automatic headlamp feature is only an in fog.

The automatic headlamp feature is only an aid. The driver is responsible for the vehicle's lighting at all times.

    See also:

    Safety guidelines for seat belts, Emergency Tensioning Devices (ETDs) and air bags
    WARNING • Damaged seat belts or seat belts that have been subjected to stress in an accident must be replaced. Their anchoring points must also be checked. Only use seat belts installed or ...

    Panic alarm
    - To activate: press button 1 for at least one second. An alarm sounds and the exterior lighting flashes. - To deactivate: press button 1 again. or - Insert the SmartKey into the ignit ...

    Wet roads
    WARNING After driving in heavy rain for some time without applying the brakes or through water deep enough to wet brake components, the first braking action may be somewhat reduced. You have ...