Installing the towing eye

tool kit. Remove the towing eye from the vehicle tool kit.

WARNING
The exhaust tail pipe may be hot. You could burn yourself if you touch the tail pipe. Be particularly careful when removing the rear cover.

The mountings for the removable towing eyes are located in the bumpers. They are at the front and at the rear, under the covers.

Press the mark on cover 1 inwards in the

direction of the arrow. Press the mark on cover 1 inwards in the direction of the arrow.

Screw the towing eye in clockwise to the Take cover 1 off the opening.

stop and tighten it. Screw the towing eye in clockwise to the stop and tighten it.

    See also:

    General notes
    WARNING Vehicles with HYBRID: ensure that you read the "HYBRID" supplement. You may otherwise fail to recognize dangers. WARNING Making alterations to electronic components can ...

    Problems with the engine
    Problem Possible causes/consequences and Solutions The engine does not start. The starter motor can be heard. • There is a malfunction in the engine electronics. • Th ...

    Blind Spot Assist
    Important safety notes Blind Spot Assist uses a radar sensor system to monitor the areas on both sides of your vehicle. It supports you from speeds of approximately 20 mph (30 km/h). A warning ...