Convenience
Activating/deactivating the EASYENTRY/ EXIT feature
You can use the Easy Entry/Exit: function to activate or deactivate the EASY ENTRY/EXIT feature.
WARNING
You must make sure no one can become
trapped or injured by the moving steering
wheel when the easy-entry/exit feature is
activated.
To stop steering wheel movement, move
steering wheel adjustment lever or press one
of the memory position buttons.
Do not leave children unattended in the
vehicle, or with access to an unlocked vehicle.
Children could open the driver's door and
unintentionally activate the easy-entry/exit
feature, which could result in an accident
and/or serious personal injury.
– Press the or
button on the
steering wheel to select the Sett. menu.
– Press the or
button to select the
Convenience submenu.
– Press the button to confirm.
– Press the or
button to select the
Easy Entry/Exit function.
You will see the selected setting: Enabled
or Disabled.
– Press the button to save the
setting.
Switching the belt adjustment on/off
For further information on belt adjustment.
– Press the or button on the steering wheel to select the Settings menu.
– Press the or button to select the Convenience submenu.
– Press the button to confirm.
– Press the or button to select the Belt Adjustment function.
You will see the selected setting: Enabled or Disabled.
– Press the button to save the setting.
Switching the Fold in mirrors when locking function on/off
If you switch on the Fold Mirrors in when Locking function, the exterior mirrors fold in when you lock the vehicle. If you unlock the vehicle and then open the driver's or frontpassenger door, the exterior mirrors fold out again.
If you have switched the function on and you fold the exterior mirrors in using the button on the door, they will not fold out automatically. The exterior mirrors can then only be folded out using the button on the door.
– Press the or
button on the
steering wheel to select the Sett. menu.
– Press the or
button to select the
Convenience submenu.
– Press the button to confirm.
– Press the or
to select the Fold
Mirrors in when Locking: function.
You will see the selected setting: Enabled
or Disabled.
– Press the button to save the
setting.
See also:
Replacing the rear window wiper blade
Removing the wiper blade
WARNING
The wiper arm could be set in motion and
injure you if the wiper is switched on.
Remove the key from the ignition lock before
replacing the wiper blade.
- R ...
Problems with fuel and the fuel tank
Problem
Possible causes/consequences and - Solutions
Fuel is leaking from the
vehicle.
!!! Risk of explosion or fire !!!
The fuel line or the fuel tank is defective.•` ...
SmartKey
0. To remove the SmartKey
(shift the transmission to position P)
1. Power supply for some consumers, such
as the windshield wipers
2. Ignition (power supply for all consumers)
and driv ...