Low-beam headlamps (halogen headlamps)
- Remove the cover in the front wheel arch.
- Turn housing cover 1 counter-clockwise
and pull it out.
- Turn bulb holder 2 counter-clockwise and
pull it out.
- Take the bulb out of bulb holder 2.
- Insert the new bulb into bulb holder 2.
- Insert bulb holder 2 into the lamp and turn
it clockwise.
- Align housing cover 1 and turn it
clockwise until it engages.
- Replace the cover in the front wheel arch.
See also:
Important safety notes
WARNING
In order to help prevent spilling liquids on
vehicle occupants and/or vehicle equipment,
only use containers that fit into the cup
holder. Use lids on open containers and do
not fill ...
Conditions for activation
RACE START can be activated when:
- the doors are closed.
- the engine is running and it has reached an
operating temperature of approximately
176 °F (80
°C). This is the case ...
Calling up a stored setting
•► Press and hold the relevant storage
position button 1, 2 or 3 until the seat,
steering wheel and exterior mirrors are in
the stored position.
The setting procedure is interrupted as
...