Switching on Blind Spot Assist
► Make sure that the radar sensor system and Blind Spot Assist are activated in the on-board
computer.
► Turn the SmartKey to position 2 in the
ignition lock.
Warning lamps 1 light up red in the exterior mirrors for approximately 1.5 seconds and then turn yellow.
See also:
Tires
Problem
Possible causes/consequences and
Solutions
USA
only:
The yellow tire pressure monitor warning lamp (pressure
loss/malfunction) is lit.
Canada only:
...
Removing and installing the cover in the
front wheel arch
You must remove the cover from the front
wheel housing before you can change the
front bulbs.
- To remove: switch off the lights.
- Turn the front wheels inwards.
- Slide up cover 1 and ...
Replacing the windshield wiper blades
Removing the wiper blades
Remove the SmartKey from the
ignition lock or turn it to position 0 (KEYLESS-GO).
Fold the wiper arm away from the
windshield until it engages.
Set the wiper blade ...