Activating
- To open the tailgate: pull the handle on
the tailgate.
- To stop the opening procedure at the
desired position: press the closing button
in the tailgate or pull the handle
on the outside of the tailgate again.
- To store the position: press and hold the
closing button in the tailgate until you hear
a short tone.
The opening angle limiter is activated. The
tailgate will now stop in the stored position
when opening.
See also:
Attaching the cargo net
Cargo net attached behind the C-pillar
Insert guide rod 2 into retainer 1 in the direction of the arrow.
Slide guide rod 2 forwards into retainer 1 in the direction of the arrow.
...
Crash-responsive emergency lighting
The interior lighting is activated automatically
if the vehicle is involved in an accident.
► To switch off the crash-responsive
emergency lighting: press the hazard
warning lamp button.
...
Cargo tie-down rings
Observe the following notes on securing
loads:
• secure the load using the cargo tie down
rings.
• do not use elastic straps or nets to secure
a load, as these are only intended as an
anti-s ...