KEYLESS-GO
General information
Vehicles with KEYLESS-GO are equipped with a SmartKey featuring an integrated KEYLESSGO function and a detachable Start/Stop button.
The Start/Stop button must be inserted into the ignition lock and the SmartKey must be in the vehicle.
Pressing the Start/Stop button several times in succession corresponds to the different SmartKey positions in the ignition lock. This is only the case if you are not depressing the brake pedal.
If you depress the brake pedal and press the Start/Stop button, the engine starts immediately.
The Start/Stop button can be removed from the ignition lock. Then, you can insert the SmartKey into the ignition lock.
You do not have to remove the Start/Stop
button from the ignition lock when you
leave the vehicle. However, you should
always take the SmartKey with you when
leaving the vehicle. The vehicle can be
started with the Start/Stop button and the
electrical equipment can be operated while
the SmartKey is in the vehicle.
1 Start/Stop button
2 Ignition lock
► Insert Start/Stop button 1 into ignition lock 2.
When you insert Start/Stop button 1 into ignition lock 2, the system
requires a
detection time of approximately two
seconds before you can use Start/Stop
button 1.
Start/Stop button
3 USA only
4 Canada only
► Position 0: if Start/Stop button 1 has
not
yet been pressed, this corresponds to the
SmartKey being removed from the ignition.
► Position 1: press Start/Stop button 1.
You can now activate the windshield wipers, for example.
If you then open the driver's door when in
this position, the power supply is
deactivated.
► Position 2 (ignition): press Start/Stop button 1 twice.
If you press Start/Stop button : once
when in this position and the driver's door
is open, the power supply is deactivated
again.
As soon as the ignition is switched on, all the indicator lamps in the instrument cluster light up. If an indicator lamp does not go out after the engine is started or if it lights up while the vehicle is in motion, see.
See also:
Treadwear indicators
Narrow bars (tread wear bars) that are
distributed over the tire tread. If the tire tread
is level with the bars, the wear limit of 1/16 in
(1.6 mm) has been reached. ...
Cleaning the wiper blades
WARNING
Before cleaning the windshield or wiper
blades, switch off the windshield wipers and
remove the SmartKey from the ignition lock.
On vehicles with KEYLESS-GO, press the
Start/Stop b ...
Adjusting the steering wheel manually
elease lever
To adjust the steering wheel height
To adjust the steering wheel position (fore-and-aft adjustment)
Push release lever 1 down completely. The steering column is unlocked.
...