Replacing the windshield wiper blades
Removing the wiper blades
► Remove the SmartKey from the ignition
lock.
► Fold the wiper arm away from the
windshield.
► Press both release clips 2.
► Fold wiper blade 1 in the direction of
arrow 3 away from wiper arm 4.
► Remove wiper blade 1 in the direction of
arrow 5.
Installing the wiper blades
► Position the new wiper blade 1 with
recess 6 on lug 5.
► Fold wiper blade 1 in the direction of
arrow 3 onto the wiper arm, until retaining
clips 2 engage in bracket 4.
► Make sure that wiper blade 1 is seated
correctly.
► Fold the wiper arm back onto the
windshield.
See also:
Securing the vehicle to prevent it from rolling away
WARNING
Only jack up the vehicle on level ground or on
slight inclines/declines. The vehicle could
otherwise fall off the jack and injure you or
others.
If your vehicle is equipped with a wh ...
Lowering the vehicle
WARNING
Vehicles with a spare wheel with a collapsible
spare wheel only: do not inflate the collapsible
spare wheel until it has been mounted.
Inflate the collapsible spare wheel using the
...
Information about driving abroad
Converting to symmetrical low beam
when driving abroad: switch the headlamps
to symmetrical low beam in countries in
which traffic drives on the opposite side of the
road to the country where ...