Low-beam headlamps (halogenheadlamps)

► Switch off the lights.
► Open the hood.
► Turn housing cover 1 counter-clockwise
and pull it out.
► Turn bulb holder 2 counter-clockwise and
pull it out.
► Take the bulb out of bulb holder 2.
► Insert the new bulb into bulb holder 2.
► Insert bulb holder 2 into the lamp and
turn
it clockwise.
► Align housing cover 1 and turn it
clockwise until it engages.
See also:
Safety guidelines for seat belts, Emergency Tensioning Devices (ETDs) and air
bags
WARNING
Damaged seat belts or seat belts that have been subjected to stress in
an accident must be replaced. Their anchoring points must also be checked. Only
use seat belts installed o ...
Turn signal lamps/side marker lamps
► Switch off the lights.
► Open the hood.
► Turn bulb holder 1 (WY 5 W)/2 (3457A)
counter-clockwise and pull it out.
► Remove the bulb from bulb holder 1/2.
► Inse ...
Using KEYLESS-GO to start the engine
WARNING
As long as the SmartKey is in your vehicle, the
vehicle can be started. Therefore, never leave
children unattended in the vehicle, as they
could otherwise accidentally start the eng ...
