Resetting the side windows

You must reset each side window if a side window can no longer be closed fully.

Turn the SmartKey to position 1 Close all the doors.
or 2 in the ignition lock. Turn the SmartKey to position 1 or 2 in the ignition lock.
the door control panel until the side window is completely closed. Pull the corresponding switch on the door control panel until the side window is completely closed.
second. Hold the switch for an additional second.

If the side window opens again slightly:
switch on the door control panel until the side window is completely closed. Immediately pull the corresponding switch on the door control panel until the side window is completely closed.
second. Hold the switch for an additional second.
remains closed after the button has been released, the side window has been If the corresponding side window remains closed after the button has been released, the side window has been reset correctly. If this is not the case, repeat the steps above again.

    See also:

    Removing/attaching the washer fluid reservoir
    You must remove the washer fluid reservoir from the engine compartment before you can replace the bulbs in the left-hand headlamp. To detach: turn catch 2 counterclockwise. Swing washer flui ...

    Important safety notes
    Have the batteries changed at a qualified specialist workshop. WARNING Batteries contain toxic substances. Swallowing batteries can lead to serious health issues or death. Keep batteries out ...

    Cleaning the wiper blades
    WARNING Before cleaning the windshield or wiper blades, switch off the windshield wipers and remove the SmartKey from the ignition lock. On vehicles with KEYLESS-GO, press the Start/Stop b ...