Step-by-step instructions

The following steps have been developed as required of all manufacturers under Title 49, Code of U.S. Federal Regulations, Part 575 pursuant to the "National Traffic and Motor Vehicle Safety Act of 1966".

  • Step 1: Locate the statement "The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs." on your vehicle’s Tire and Loading Information placard.
  • Step 2: Determine the combined weight of the driver and passengers that will be riding in your vehicle.
  • Step 3: Subtract the combined weight of the driver and passengers from XXX kilograms or XXX lbs.
  • Step 4: The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the "XXX" amount equals 1400 lbs and there will be five 150 lbs passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs (1400 - 750 (5 x 150) = 650 lbs).
  • Step 5: Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in step 4.
  • Step 6 (if applicable): If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle ().
    See also:

    Vehicles with a "Minispare" emergencyspare wheel
    ► Lift the trunk floor up. 1 Alignment bolt 2 Towing eye 3 Lug wrench 4 Ratchet wrench 5 Velcro fastener 6 Jack 7 Wheel bolts 8 Folding wheel chock 9 Fuse allocation chart 10 Stowage ...

    Sets the specified minimum distance
    You can set the specified minimum distance for DISTRONIC PLUS by varying the time span between one and two seconds. With this function, you can set the minimum distance that DISTRONIC PLUS kee ...

    Information about electronic data acquisition in the vehicle
    (Including notice pursuant to California Code § 9951) Your vehicle records electronic data. If your vehicle is equipped with mbrace1, data is transmitted in the event of an accident. This info ...