Sets the specified minimum distance
You can set the specified minimum distance for DISTRONIC PLUS by varying the time span between one and two seconds. With this function, you can set the minimum distance that DISTRONIC PLUS keeps to the vehicle in front, dependent on vehicle speed. You can see this distance in the multifunction display
WARNING
It is up to the driver to exercise discretion to
select the appropriate setting given road
conditions, traffic, driver's preferred driving
style and applicable laws and driving
recommendations for safe following distance
•► To increase: turn control 2 in direction 3.
DISTRONIC PLUS then maintains a greater distance between your vehicle and the vehicle in front.
•► To decrease: turn control 2 in direction 1.
DISTRONIC PLUS then maintains a shorter distance between your vehicle and the vehicle in front.
Make sure that you maintain a sufficient and safe distance from the vehicle in front.
Adjust the distance to the vehicle in front if necessary.
See also:
Drive sensibly – save fuel
Observe the following tips to save fuel:
•► The tires should always be inflated to the
recommended tire pressure.
•► Remove unnecessary loads.
•► Remove roof racks when they are ...
Setting the front-compartment
temperature using the front control
panel
Turn the SmartKey to position 2 in the
ignition lock.
To increase/reduce: press the
rocker switch up or down.
Only change the temperature setting in
small increments. Start at 72 °F (22 °C ...
Preparing the vehicle
WARNING
The wheel and tire size of the emergency
spare wheel/spare wheel may differ to that of
the damaged wheel. When using an
emergency spare wheel/spare wheel the
handling characteristic ...