DOT, Tire Identification Number (TIN)

U.S. tire regulations prescribe that every manufacturer of new tires or retreader has to imprint a TIN in or on the sidewall of each tire produced.

The TIN is a unique identification number. The

The TIN is a unique identification number. The TIN enables the tire manufacturers to inform purchasers of recalls and other safetyrelevant matters. It makes it possible for the purchaser to easily identify the affected tires.

The TIN is made up of manufacturer identification code 2, tire size 3, tire type code 4 and manufacturing date 5.

deviate from the data in the example. Tire data is vehicle-specific and may deviate from the data in the example.

DOT (Department of Transportation): tire symbol 1 indicates that the tire complies with the requirements of the U.S. Department of Transportation.

Manufacturer identification code: manufacturer identification code 2 provides details on the tire manufacturer. New tires have a code with two symbols. Retreaded tires have a code with four symbols.

Further information about retreaded tires.

Tire size: identifier 3 describes the tire size.

Tire type code: tire type code 4 can be used by the manufacturer as a code to describe specific characteristics of the tire.

Date of manufacture: date of manufacture 5 provides information about the age of a tire. The first and second positions represent the week of manufacture, starting with "01" for the first calendar week. Positions three and four represent the year of manufacture.

For example, a tire that is marked with "3208", was manufactured in week 32 in 2008.

    See also:

    SAFETY
    The CLS550's two sets of lower Latch anchors make child-safety seat installation a piece of cake. There's no searching or digging for the anchors since they sit out in the open. Just flip the rubb ...

    Overview of interior lighting
    Front overhead control panel 1. Switches the rear interior lighting on/off 2. Switches the automatic interior lighting control on/off 3. Switches the right-hand front reading lam ...

    Vehicle identification p
    Even if you have calculated the total load carefully, you should still make sure that the gross vehicle weight rating and the gross axle weight rating are not exceeded. Details can be found on the ...