Charging the battery
WARNING
Never charge a battery still installed in the
vehicle unless a battery charger unit approved
by Mercedes-Benz is being used. Gases may
escape during charging and cause explosions
that may result in paint damage, corrosion or
personal injury.
A battery charger unit specially adapted for
Mercedes-Benz vehicles and tested and
approved by Mercedes-Benz is available as an
accessory. It permits the charging of the
battery in its installed position. Contact an
authorized Mercedes-Benz Center for further
information and availability.
Charge the battery in accordance with the
separate instructions for the battery charger.
WARNING
There is a risk of acid burns during the
charging process due to the gases which
escape from the battery. Do not lean over the
battery during the charging process.
WARNING
Battery acid is caustic. Avoid contact with the
skin, eyes or clothing.
Only charge the installed battery with a battery charger which has been tested and approved by Mercedes-Benz. These battery chargers allow the battery to be charged while still installed.
Only use battery chargers with a maximum charging voltage of 14.8 V.
Only charge the battery using the jumpstarting connection point.
The jump-starting connection point is in the engine compartment.
Open the hood.
Connect the battery charger to the positive terminal and earth point in the same order as when connecting the donor battery in the jump-starting procedure.
Read the battery charger's operating instructions before charging the battery.
See also:
Windshield/headlamp cleaningsystem
WARNING
Washer solvent/antifreeze is highly
flammable. Do not spill washer solvent/
antifreeze on hot engine parts, because it may
ignite and burn. You could be seriously
burned.
Use ...
Opening/closing automatically from
inside
WARNING
Maintain sight of the area around the rear of
the vehicle while operating the tailgate with
the door-mounted remote tailgate switch.
Monitor the opening procedure carefully to
make su ...
Overhead control panel
Overhead control panel
Function
1 Switches the rear interior lighting on/off
2 Switches the automatic interior
lighting control on/off
3 Switches the righthand reading
lamp on/off
4 Ope ...