Problems with Night View Assist Plus

Problem Possible causes/consequences and Solutions Solutions
The picture quality of Night View Assist Plus has deteriorated. The windshield wipers are smearing the windshield.
Replace the wiper blades.
The windshield is smeared after the vehicle has been cleaned in a car wash.
Clean the windshield.
There is windshield chip damage in the camera's field of vision.
Replace the windshield.
The windshield is fogged up on the inside.
Defrost the windshield.
The windshield is iced up.
De-ice the windshield.
There is dirt on the inside of the windshield.
Clean the inside of the windshield.
    See also:

    Starting procedure with the SmartKey
    To start the engine using the SmartKey instead of KEYLESS-GO, pull the Start/ Stop button out of the ignition lock. •►  To start a gasoline engine: turn the SmartKey to position 3 in ...

    Uploading/downloading data
    With this function, you can transfer COMAND data from one system (vehicle) to another system (vehicle). You can use either a USB stick or an SD card as temporary storage. You can only transfer ...

    Important safety notes
    You will find an illustration of the instrument cluster in the "At a glance" section (). WARNING A driver's attention to the road and traffic conditions must always be his/her ...