4MATIC (permanent four-wheel drive)
4MATIC ensures that all four wheels are permanently driven. Together with ESP®, it improves the traction of your vehicle whenever a drive wheel spins due to insufficient grip.
WARNING
If a drive wheel is spinning due to insufficient
traction:
• While driving off, apply as little throttle as
possible.
• While driving, ease up on the accelerator
pedal.
• Adapt your speed and driving style to the
prevailing road conditions.
Failure to observe these guidelines could
cause the vehicle to skid.
The 4MATIC cannot prevent accidents
resulting from excessive speed.
Never tow the vehicle with one axle
raised. This may damage the transfer case.
Damage of this sort is not covered by the
Mercedes-Benz Limited Warranty. All
wheels must remain either on the ground
or be fully raised. Observe the instructions
for towing the vehicle with all wheels in full
contact with the ground.
In wintry driving conditions, the maximum
effect of 4MATIC can only be achieved if
you use winter tires (M+S tires), with snow
chains if necessary.
See also:
Activating/deactivating PRE-SAFE®
Brake
PRE-SAFE® Brake is only available in vehicles
with DISTRONIC PLUS.
Press the or
button on the
steering wheel to select the DriveAssist
menu.
Press or
to select PRE-SAFE
Brake.
Pres ...
Cleaning the paintwork
Scratches, corrosive deposits, areas affected by corrosion and damage caused
by inadequate care cannot always be completely repaired. In such cases, visit a
qualified specialist workshop, e.g. an ...
Activating the HOLD function
Make sure that the activation conditions
are met.
Depress the brake pedal.
Quickly depress the brake pedal further
until HOLD display 1 appears in the
instrument cluster.
The HOLD functi ...
