Activating the HOLD function
Make sure that the activation conditions
are met.
Depress the brake pedal.
Quickly depress the brake pedal further
until HOLD display 1 appears in the
instrument cluster.
The HOLD function is activated. You can release the brake pedal.
If depressing the brake pedal the first
time does not activate the HOLD function,
wait briefly and then try again.
WARNING
The vehicle's brakes are applied when the
HOLD function is activated. For this reason,
deactivate the HOLD function if the vehicle is
to be set in motion by other means (e.g. in a
car wash or by towing).
See also:
Servicing the brakes
If the red brake warning lamp lights up in
the instrument cluster and you hear a
warning tone while the engine is running,
the brake fluid level may be too low.
Observe additional warning ...
Problems with PARKTRONIC
Problem
Possible causes/consequences and
Solutions
Only the red segments in the PARKTRONIC warning displays
are lit.
You also hear a warning tone for approximately two ...
Removing the mechanical key
- Push release catch 1 in the direction of
the arrow and at the same time, remove
mechanical key 2 from the SmartKey. ...