DISTRONIC PLUS displays in the multifunction display
General notes
You can select the distance display in the Assistance menu of the onboard computer.
Display when DISTRONIC PLUS is deactivated
Select the Distance Display function
using the on-board computer.
When DISTRONIC PLUS is deactivated, you will see the following in the multifunction display:
1 Symbol for activated PRE-SAFE® Brake
2 Vehicle in front, if detected
3 Distance indicator, current distance to the vehicle in front
4 Specified minimum distance to the vehicle in front; adjustable
5 Own vehicle
Display when DISTRONIC PLUS is activated
Select the Distance Display function
using the on-board computer.
You will see the stored speed for about five seconds when you activate DISTRONIC PLUS.
After this time, you will see the following in the multifunction display while DISTRONIC PLUS is activated:
1 DISTRONIC PLUS activated
2 Own vehicle
3 Specified minimum distance to the vehicle in front; adjustable
4 Vehicle in front, if detected
See also:
Vehicle data
For the specified vehicle data, please note
that:
The heights specified may vary due to:
- tires
- load
- condition of the suspension
- optional equipment
Missing values were not avai ...
Wet roads
WARNING
After driving in heavy rain for some time
without applying the brakes or through water
deep enough to wet brake components, the
first braking action may be somewhat
reduced. You hav ...
Important notes on tire pressure
WARNING
Should the tire pressure drop repeatedly:
• check the tire for foreign bodies.
• check whether the wheel is losing air or the valve is leaking.
• make sure that only a valve cap approved ...