Problems with the side windows

Problem: a side window cannot be closed because it is blocked by objects, e.g. leaves in the window guide.

Remove the objects.
Problem: a side window cannot be closed Close the side window.

Problem: a side window cannot be closed and you cannot see the cause.

WARNING
Closing the side windows with increased force or without the anti-entrapment feature could lead to serious or even fatal injury. Make sure that nobody can become trapped when closing the side windows.

If a side window is obstructed during closing and reopens again slightly:
the corresponding switch again until the Immediately after the window blocks, pull the corresponding switch again until the side window has closed.
The side window is closed with increased force.

If a side window is obstructed again during closing and reopens again slightly:
the corresponding switch again until the Immediately after the window blocks, pull the corresponding switch again until the side window has closed.
The side window is closed without the antientrapment feature.

WARNING
Pulling and holding the switch to close the door window immediately after it had been blocked two times will cause the door window to close without the anti-entrapment feature for as long as you hold the switch.

    See also:

    Lights
    Switching the daytime running lamps on/off This function is not available in Canada. If you have activated the Daytime Running Lights: function and the light switch is in the or position, the ...

    Switching the city model on/off
    When the city model is switched on, the map shows buildings as 3D models. The city model is only shown in the "3D map" map orientation. It is available for map scales 50 m and 100 ...

    Inserting the brackets into the loading rail
    – Insert bracket 1 into the center of loading rail 4. – Press release button 2 and push bracket 1 into the desired position in loading rail 4. – Let go of release button 2. – Press lockin ...