Low-beam headlamps (halogen headlamps)

Low-beam headlamps (halogen headlamps)
Low-beam headlamps (halogen headlamps)

Open the hood. Switch off the lights.
Turn housing cover 1 Open the hood.
counter-clockwise and pull it out. Turn housing cover 1 counter-clockwise and pull it out.
counter-clockwise and pull it out. Turn bulb holder 2 counter-clockwise and pull it out.
2. Take the bulb out of bulb holder 2.
holder 2. Insert the new bulb into bulb holder 2.
and turn it clockwise. Insert bulb holder 2 into the lamp and turn it clockwise.
clockwise until it engages. Align housing cover 1 and turn it clockwise until it engages.

    See also:

    Engine number
    1 Emission control information plate, including the certification of both federal and Californian emissions standards 2 Engine number (stamped into the crankcase) 3 VIN (on the lower edge ...

    Tire tread
    WARNING Although the applicable federal motor vehicle safety laws consider a tire to be worn when the tread wear indicators (TWI) become visible at approximately 1/16 in (1.6 mm), we recomm ...

    Adding engine oil
    Environmental note When adding oil, take care not to spill any. If oil enters the soil or waterways, it is harmful to the environment. WARNING   If engine oil comes into contact with ho ...