Special seat belt retractor
All seat belts except the driver's seat belt are equipped with a special seat belt retractor.
When activated, the special seat belt retractor ensures the seat belt will not slacken once the child restraint system has been secured.
Installing a child restraint system:
Always comply with the manufacturer's
installation instructions.
Pull the seat belt smoothly from the inertia
reel.
Engage the seat belt tongue in the belt
buckle.
Activating the special seat belt retractor:
Pull the seat belt out fully and let the inertia
reel retract it again.
While the seat belt is retracting, you should
hear a ratcheting sound. The special seat
belt retractor is enabled.
Push down on the child restraint system to
take up any slack.
Removing a child restraint system/deactivating the special seat belt
retractor:
Always comply with the manufacturer's
installation instructions.
Press the seat belt release button and
guide the belt tongue to the belt outlet.
The special seat belt retractor is
deactivated.
WARNING
Never release the seat belt buckle while the
vehicle is in motion, since the special seat belt
retractor will be deactivated.
See also:
Mounting a new wheel
WARNING
Always replace wheel bolts that are damaged or rusted.
Never apply oil or grease to wheel bolts. Damaged wheel hub threads should be
repaired immediately. Do not continue to drive und ...
Rear-end structure: side members with specifically graduated material
thicknesses
Multi-piece side members and a robust, flexible crossmember made from
ultra-high-strength steel form the key components of the rear-end structure. The
rear side members are continuous, closed box ...
Preparing the vehicle
Your vehicle may be equipped with a
"Minispare" emergency spare wheel or
MOExtended tires (tires with run-flat
properties).
Vehicle preparation is not necessary on
vehicles with MOEx ...