SmartKey
0. To remove the SmartKey
(shift the transmission to position P)
1. Power supply for some consumers, such
as the windshield wipers
2. Ignition (power supply for all consumers)
and drive position
3. To start the engine
If the SmartKey is in position 0 in the ignition lock for an extended period of time, it can no longer be turned in the ignition lock. The steering is then locked. To unlock, remove the SmartKey and reinsert it into the ignition lock.
The steering is locked when you remove the SmartKey from the ignition lock.
The SmartKey can be turned in the ignition lock even if it is not the correct SmartKey for the vehicle. The ignition is not switched on. The engine cannot be started.
See also:
Drive sensibly – save fuel
Observe the following tips to save fuel:
The tires should always be inflated to the recommended tire pressure.
Remove unnecessary loads.
Remove roof racks when they are not needed.
Warm up t ...
Operation
Depending on the date of manufacture of your
vehicle, the or
symbol for the
automatic headlamp mode/daytime running
lamps is located on the light switch.
Left-hand standing lamps
Righ ...
Tire characteristics
Tire data is vehicle-specific and may
deviate from the data in the example.
This information describes the tire cord and
the number of layers in sidewall 1 and under
the tread 2. ...