Emergency call

Important safety notes

that your system is activated and ready for use, and press the A license agreement must exist in order to activate the mbrace service. Ensure that your system is activated and ready for use, and press the any of the steps mentioned is not carried out, the system may not be activated. MB Info call button to register. If any of the steps mentioned is not carried out, the system may not be activated.

If you have questions about the activation, contact one of the following telephone assistance services:

USA: Mercedes-Benz Customer Assistance Center under
1-800-FOR-MERCedes (1-800-367-6372) or 1-888-990-9007

Canada: Customer Service at 1-888-923-8367

An emergency call is dialed automatically if an air bag or Emergency Tensioning Device is triggered.

by the customer. An mbrace emergency call that has been initiated automatically cannot be terminated by the customer.

An emergency call can also be initiated manually.

As soon as the emergency call has been initiated, the indicator lamp in the SOS button flashes. The Connecting Call message appears on the multifunction display. The audio output is muted.

Once a connection has been established, the Call Connected message appears in the multifunction display.

All important information on the emergency is transmitted, for example:

  • current location of the vehicle (as determined by the GPS system)
  • vehicle identification number
  • information on the type of emergency Shortly after the emergency call has been initiated, a voice connection is automatically established between the Mercedes-Benz Customer Assistance Center and the vehicle occupants. If the vehicle occupants respond, the Mercedes-Benz Customer Assistance Center attempts to get more information on the emergency.

If no vehicle occupant answers, an ambulance is immediately sent to the vehicle.

WARNING WARNING

If the indicator lamp in the SOS button is flashing continuously and no voice connection to the Mercedes-Benz Customer Assistance Center was established, then the mbrace system could not initiate an emergency call (e.g. the relevant cellular phone network is not available).

The message Call Failed appears in the multifunction display for approximately 10 seconds.

Should this occur, assistance must be summoned by other means.

Making an emergency call

  • To initiate an emergency call manually: press cover 1 briefly to open it.
  • Press SOS button 2 briefly. The indicator lamp in SOS button 2 flashes until the emergency call is concluded.
  • Wait for a voice connection to the Mercedes-Benz Customer Assistance Center.
  • After the emergency call is ended, close cover 1.

WARNING WARNING

If you feel in any way in jeopardy when in the vehicle (e.g. smoke or fire in the vehicle, vehicle in a dangerous road location), please do not wait for voice contact after you have pressed the SOS button. Carefully leave the vehicle and move to a safe location. The Mercedes-Benz Customer Assistance Center will automatically contact local emergency officials with the vehicle's approximate location if they receive an automatic SOS signal and cannot make voice contact with the vehicle occupants.

    See also:

    Vehicle identification plate
    Even if you have calculated the total load carefully, you should still make sure that the gross vehicle weight rating and the gross axle weight rating are not exceeded. Details can be found on ...

    Securing the vehicle to prevent it from rolling awa
    WARNING Only jack up the vehicle on level ground or on slight inclines/declines. The vehicle could otherwise fall off the jack and injure you or others. If your vehicle is equipped with a ...

    Stowage compartments in the front
    Glove box Depending on the vehicle's equipment, you will find an AUX IN jack or a Media Interface installed in the glove box. A Media Interface is a universal interface for mobile audio eq ...