Installing the towing eye
Remove the towing eye from the vehicle tool kit.
WARNING
The exhaust tail pipe may be hot. You could
burn yourself if you touch the tail pipe. Be
particularly careful when removing the rear
cover.
The mountings for the removable towing eyes are located in the bumpers. They are at the front and at the rear, under the covers.
Press the mark on cover 1 inwards in the
direction of the arrow.
Take cover 1 off the opening.
Screw the towing eye in clockwise to the
stop and tighten it.
See also:
Important safety notes
Your vehicle may be equipped with a sliding
sunroof or a panorama roof with power tilt/sliding panel. In the following
section, the
term "sliding sunroof" refers to both types of
sli ...
Useful information
This Operator's Manual describes all
models and all standard and optional
equipment of your vehicle available at the
time of publication of the Operator's
Manual. Country-specific differe ...
Calibrating the compass
Make sure that there is sufficient space for you to drive in a circle
without impeding the remaining traffic.
In order to calibrate the compass correctly, observe the following points:
ca ...