Changing the settings of the lockingsystem
You can change the setting of the locking system in such a way that only the driver's door and the fuel filler flap are unlocked. This is useful if you frequently travel on your own.
► To change the setting: press and hold
down the 
buttons
simultaneously for approximately six
seconds until the battery check lamp flashes twice.
If the setting of the locking system is
changed within the signal range of the
vehicle, pressing the 
button
locks or unlocks the vehicle.
The SmartKey now functions as follows:
► To unlock the driver's door: press the
button once.
► To unlock centrally: press the
button twice.
► To lock centrally: press the
button.
The KEYLESS-GO function is changed as follows:
► To unlock the driver's door: touch the
inner surface of the door handle on the
driver's door
► To unlock centrally: touch the inner
surface of the door handle on the frontpassenger
door or the rear door.
► To lock centrally: press the locking
button
on one of the door handles.
See also:
Switching on/off
- Make sure that the SmartKey is in position
2 in the ignition lock.
- To switch on/off: turn the lever in the
direction of arrow 1 or 2.
Indicator lamp 3 lights up or goes out.
Vehicles with ...
Adjusting the front-passenger seat from the driver's seat
WARNING
When adjusting the front passenger seat,
make sure the seat, if occupied, is as far from
the front passenger front air bag as possible.
Otherwise, the passenger could be seriously
...
General notes
USA only:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. this device must a ...