Setting the compass
- Determine your position using the following zone maps.
North America zone map
South America zone map
- Press a round pin into opening 3() for approximately three seconds. The currently selected zone appears in compass display 2().
- To select the zone: press a round pin into opening 3() repeatedly until the desired zone is selected. The zone has been selected when compass display 2() shows the heading. This takes a few seconds.
See also:
Deactivating DISTRONIC PLUS
There are several ways to deactivate
DISTRONIC PLUS:
•► Briefly press the cruise control lever
forwards 1.
or•► Brake, unless the vehicle is stationary.
When you deactivate DIS ...
Windshield/headlamp cleaning
system
WARNING
Washer solvent/antifreeze is highly
flammable. Do not spill washer solvent/antifreeze on hot engine parts, because
it may
ignite and burn. You could be seriously
burned.
Use MB Sum ...
Vehicles with manual transmission
•► Shift to either first gear or reverse gear R.•► Turn the SmartKey to position 0 in the
ignition lock and remove it.
The immobilizer is activated.•► Apply the parking brake f ...