Changing the battery
You require a CR 2025 3 V cell battery.
- Take the mechanical key out of the SmartKey ().
- Press mechanical key 2 into the opening in the SmartKey in the direction of the arrow until battery tray cover 1 opens. When doing so, do not hold cover 1 shut.
- Remove battery tray cover 1.
- Repeatedly tap the SmartKey against your palm until battery 3 falls out.
- Insert the new battery with the positive terminal facing upwards. Use a lint-free cloth to do so.
- Make sure that the surface of the battery is free from lint, grease and all other forms of contamination.
- Insert the front tabs of battery tray cover 1 and then press to close it.
- Insert the mechanical key into the SmartKey.
- Check the function of all SmartKey buttons on the vehicle.
See also:
System self-test
After you have switched on the ignition, the
system carries out a self-diagnosis.
WARNING
A malfunction in the system has been
detected if one of the following conditions
occurs:
• the indi ...
Vehicle data
For the specified vehicle data, please note that:
The heights specified may vary due to:
- tires
- load
- condition of the suspension
- optional equipment
...
Driving on flooded roads
Do not drive through flooded areas.
Check the depth of any water before driving
through it. Drive slowly through standing
water. Otherwise, water may enter the
vehicle interior or the engi ...