System self-test

After you have switched on the ignition, the system carries out a self-diagnosis.

WARNING
A malfunction in the system has been detected if one of the following conditions occurs:
• the indicator lamp in the SOS button does not light up during the system self-diagnosis.
• the indicator lamp in the Roadside Assistance button does not light up during the system self-diagnosis. Roadside Assistance button does not light up during the system self-diagnosis.
• The indicator lamp in the information button does not light up during selfdiagnosis of the system. information button does not light up during selfdiagnosis of the system.
• the indicator lamp in the SOS button, information button continues to be Roadside Assistance button or lit red after the system self-diagnosis. information button continues to be lit red after the system self-diagnosis.
• The Tele Aid Inoperative or Tele Aid Not Activated message appears in the multifunction display after the system self-test.
If a malfunction is indicated as outlined above, the system may not operate as expected. In the event of an emergency, assistance must be summoned by other means.
Have the system checked at the nearest authorized Mercedes-Benz Center or contact the following service hotlines:
• USA: Mercedes-Benz Customer Assistance Center under
1-800-FOR-MERCedes(1-800-367-6372)
or 1-888-990-9007
• Canada: Customer Service at
1-888-923-8367

    See also:

    Important safety notes
    Parking Guidance is only available in Canada. Parking Guidance is an electronic parking aid with ultrasound. Ultrasound is used to measure the road on both sides of the vehicle. A suitable ...

    Cornering light function (Bi-Xenon headlamps)
    Cornering light function (Bi-Xenon headlamps) Switch off the lights. Open the hood. Turn housing cover 1 counter-clockwise and pull it out. Turn bulb holder 2 counter-clockwise and pull ...

    DEF
    Important notes on use To function properly, BlueTEC exhaust gas aftertreatment must be operated with the reducing agent DEF. Adding DEF is one of the tasks performed during maintenance. Under no ...