Folding the seat backrest back
•► Move the driver's or front-passenger seat forward if necessary.
! Make sure that the seat belt does not become trapped when folding the rear seat backrest back. Otherwise, it could be damaged.
•► Fold rear seat backrest 1 back until it engages.
WARNING
Always lock the seat backrest in its upright
position when the rear seat bench is
occupied, or the extended cargo volume is not
in use.
Check for secure locking by pushing and pulling on the seat backrest.
In an accident, during hard braking or sudden maneuvers, loose items will be thrown around inside the vehicle. This can cause injury to vehicle occupants unless the items are securely fastened in the vehicle.
To help avoid personal injury during a collision or sudden maneuver, exercise care when transporting cargo.
You should always engage the rear seat backrests if you do not need the throughloading feature. This will prevent unauthorized access to the trunk from the vehicle interior.
•► Adjust the head restraints if necessary.
•► Move the driver's or front-passenger seat back if necessary.
See also:
Removing the mechanical key
- Push release catch 1 in the direction of
the arrow and at the same time, remove
mechanical key 2 from the SmartKey. ...
Entering an intermediate stop
Introduction
When route guidance is active, you can enter
an intermediate stop. Intermediate stops can
be predefined destinations from the following
categories that COMAND offers for selection: ...
Brow of hill
When driving up an uphill gradient, slightly reduce pressure on the accelerator
immediately before reaching the brow of the hill. Use the vehicle's own impetus
to drive over the top of the hil ...