Storing the current speed or calling up a stored speed

WARNING
The set speed stored in memory should only be set again if prevailing road conditions and legal speed limits permit. Possible acceleration or deceleration differences arising from returning to the preset speed could cause an accident and/or serious injury to you and others.

•► Briefly pull the cruise control lever towards you 4.

•► Remove your foot from the accelerator pedal.

DISTRONIC PLUS is activated. The first time it is activated, the current speed is stored. Otherwise, it sets the vehicle cruise speed to the previously stored value.

    See also:

    Vehicle
    Activating/deactivating the automatic door locking feature If you select the Automatic Door Lock: function, the vehicle is centrally locked above a speed of around 9 mph (15 km/h). For further ...

    Cleaning the display
    ► Before cleaning the display, make sure that it is switched off and has cooled down. ► Clean the display surface using a commercially-available microfiber cloth and TFT/LCD display ...

    Introduction
    In the DriveAssist. menu you can:  - show the distance display  - activate/deactivate ESP®  - activate/deactivate PRE-SAFE® Brake  - activate/deactivate ATTENTION AS ...