Changing the settings of the locking system
You can change the setting of the locking system in such a way that only the driver's door and the fuel filler flap are unlocked. This is useful if you frequently travel on your own.
•► To change the setting: press and hold down the and buttons simultaneously for approximately six seconds until the battery check lamp flashes twice.
If the setting of the locking system is changed within the signal range of the vehicle, pressing the or button locks or unlocks the vehicle.
The SmartKey now functions as follows:
•► To unlock the driver's door: press the
button once.
•► To unlock centrally: press the
button twice.
•► To lock centrally: press the
button.
The KEYLESS-GO function is changed as follows:
•► To unlock the driver's door: touch the
inner surface of the door handle on the
driver's door.
•► To unlock centrally: touch the inner
surface of the door handle on the frontpassenger
door or the rear door.
•► To lock centrally: touch the outer sensor
surface on one of the door handles.
See also:
Displaying details
Select Data/Connections in the
telephone basic menu by sliding and
turning the COMAND controller and
press to confirm.
Select Bluetooth Telephones and press
to confirm.
Select the des ...
Service menu
In the Service menu you can:
call up display messages ()
restart the tire pressure loss warning system (Canada only) ()
check the tire pressure electronically (USA only) ()
call up the ser ...
Introduction
In the DriveAssist. menu you can:
- show the distance display
- activate/deactivate PRE-SAFE® Brake
- activate/deactivate ATTENTION ASSIST
- activate/deactivate Blind Spot Assist or Active Blind ...