View through the camera
The area behind the vehicle is displayed in a mirror-inverted manner, as in the rear-view mirror.
WARNING
The rear view camera is only an aid and may
display obstacles
• from a distorted perspective
• inaccurately
• may not display obstacles at all
The rear view camera does not relieve you of
the responsibility to be cautious. Take care
and pay careful attention. The rear view
camera may not show objects which are
• very close to the rear bumper
• under the rear bumper
• above the trunk handle
You are responsible for safety at all times and
must continue to pay attention to the
immediate surroundings when parking and
maneuvering. This includes the area behind,
in front of, and beside the vehicle. Otherwise
you could endanger yourself and/or others.
WARNING
The rear view camera will not function or will
not fully function if:
• the trunk lid is open
• it is raining or snowing strongly or if it is
foggy
• it is night or if you are parking/maneuvering your vehicle in a very dark
area
• a very bright white light is affecting the
camera
• the immediate vicinity is illuminated with
fluorescent light (the display of the
COMAND system can flicker)
• temperature changes abruptly, for example
if you drive out of the cold into a heated
garage (condensation on the lens)
• the camera lens is dirty or covered
• the rear of your vehicle is damaged
In this case, have the position and the
setting of the camera checked at a
specialist workshop. Mercedes-Benz
recommends that you consult a Mercedes-
Benz Center for this purpose.
Do not use the rear view camera in these
situations. You could otherwise injure
yourself and other people and/or cause
damage - including damage to your vehicle -
while parking/maneuvering.
See also:
Showing the distance display
This function is only available with
DISTRONIC PLUS.
Press the or
button on the
steering wheel to select the DriveAssist
menu.
Press the or
button to select
Distance Display.
Press ...
Control panel for dual-zone automatic climate control
Canada only
1. To activate/deactivate air-recirculation mode
2. To defrost the windshield
3. To switch the ZONE function on/off
4. Display
5. To set climate control to automatic
...
Operating the on-board computer
The on-board computer is activated as soon
as you turn the SmartKey to position 2 in the
ignition lock.
You can control the multifunction display and
the settings in the on-board computer using ...