Activating the HOLD function
Make sure that the activation
conditions
are met.
Depress the brake pedal.
Quickly depress the brake pedal
further
until HOLD display 1 appears in the
multifunction display.
The HOLD function is activated. You can
release the brake pedal.
If depressing the brake pedal
the first
time does not activate the HOLD function,
wait briefly and then try again.
WARNING
The vehicle's brakes are applied when the
HOLD function is activated. For this reason,
deactivate the HOLD function if the vehicle is
to be set in motion by other means (e.g. in a
car wash or by towing).
See also:
Temperature
WARNING
The temperature grade for this tire is
established for a tire that is properly inflated
and not overloaded. Excessive speed,
underinflation, or excessive loading, either
separately ...
Stop function
This function is only available in audio DVD
mode.
Switch on audio DVD mode.
To interrupt playback: select
by
sliding and turning
the COMAND
controller and press to confirm.
The disp ...
Stowage well under the trunk floor
(Sedan)
The TIREFIT kit, the vehicle tool kit, etc. are
located in the stowage compartment.
•► To open: pull handle 1 upwards
•► Hook handle 1 into rain trough 2.
! Unhook the handle befo ...