Cornering light function (Bi-Xenon headlamps)

Cornering light function (Bi-Xenon headlamps)
Cornering light function (Bi-Xenon headlamps)

Open the hood. Switch off the lights.
Turn housing cover 1 Open the hood.
counter-clockwise and pull it out. Turn housing cover 1 counter-clockwise and pull it out.
counter-clockwise and pull it out. Turn bulb holder 2 counter-clockwise and pull it out.
2. Take the bulb out of bulb holder 2.
holder 2. Insert the new bulb into bulb holder 2.
and turn it clockwise. Insert bulb holder 2 into the lamp and turn it clockwise.
clockwise until it engages. Align housing cover 1 and turn it clockwise until it engages.

    See also:

    Wheel and tire combinations
    Please bear the following in mind For safety reasons, Mercedes-Benz recommends that you only use Tires and wheels which have been approved by Mercedes-Benz specifically for your vehicle. These ...

    Adjusting the volume
    This function is available for SPLITVIEW and for the Rear Seat Entertainment System in conjunction with corded headphones. Press one of buttons 7 on the remote control. The volume of the cu ...

    Bar
    Metric unit for tire pressure. There are 14.5038 pounds per square inch (psi) to 1 bar; there are 100 kilopascals (kPa) to 1 bar. ...