High-beam headlamps (halogen headlamps)

High-beam headlamps (halogen headlamps)
High-beam headlamps (halogen headlamps)

Open the hood. Switch off the lights.
Turn housing cover 1 Open the hood.
counter-clockwise and pull it out. Turn housing cover 1 counter-clockwise and pull it out.
counter-clockwise and pull it out. Turn bulb holder 2 counter-clockwise and pull it out.
2. Take the bulb out of bulb holder 2.
holder 2. Insert the new bulb into bulb holder 2.
and turn it clockwise. Insert bulb holder 2 into the lamp and turn it clockwise.
clockwise until it engages. Align housing cover 1 and turn it clockwise until it engages.

    See also:

    Attaching the roof carrier
    Attaching the roof carrier Open covers 1 carefully in the direction of the arrow. Fold covers 1 upwards. Only secure the roof carrier to the anchorage points under covers 1. Observe th ...

    Useful information
    This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences are ...

    Blind Spot Assist
    Important safety notes Blind Spot Assist uses a radar sensor system to monitor the areas on both sides of your vehicle. It supports you from speeds of approximately 20 mph (30 km/h). A warning ...