Resetting the panorama roof with power tilt/sliding panel and the roller sunblinds
Reset the panorama roof with power tilt/sliding panel and the roller sunblinds if the panorama roof with power tilt/sliding panel or the roller sunblinds do not move smoothly.
Turn the SmartKey to position
1 or 2 in the ignition lock.
Press the
switch to the point of
resistance in the direction of arrow 2 and
hold it until the panorama roof with power
tilt/sliding panel has opened about 4 in
(10 cm).
Pull the
switch repeatedly to the point
of resistance in the direction of arrow 3
until the panorama roof with power tilt/sliding panel is fully closed.
Keep the
switch pulled for an additional
second.
Press the
switch to the point of resistance
in the direction of arrow 2 and hold it until the sunblinds have opened about 4
in (10 cm).
Pull the
switch repeatedly to the point
of resistance in the direction of arrow 3
until the roller sunblinds are fully closed.
Keep the
switch pulled for an
additional second.
Make sure that the panorama roof
with
power tilt/sliding panel and the roller
sunblinds can be fully opened and closed
again.
If this is not the case, repeat the
steps
above again.
If the panorama roof with power tilt/sliding panel and the roller sunblind cannot be fully opened or closed after resetting, contact a qualified specialist workshop.
See also:
Preparing the vehicle
WARNING
The wheel and tire size of the emergency
spare wheel/spare wheel may differ to that of
the damaged wheel. When using an
emergency spare wheel/spare wheel the
handling characteristics ...
Useful information
This Operator's Manual describes all
models and all standard and optional
equipment of your vehicle available at the
time of publication of the Operator's
Manual. Country-specific differences ...
Notes on regularly inspecting wheelsand tires
WARNING
Regularly check the tires for damage.
Damaged tires can cause tire inflation
pressure loss. As a result, you could lose
control of your vehicle.
Worn, old tires can cause acci ...