Cleaning the sensors

– Clean sensors 1 of the driving systems

– Clean sensors 1 of the driving systems with water, car shampoo and a soft cloth.

When cleaning the sensors with a power When cleaning the sensors with a power washer, maintain a distance between the vehicle and the nozzle of the power washer of at least 11.8 in (30 cm). Information about the correct distance is available from the equipment manufacturer.

    See also:

    Unlocking the trunk (mechanical key)
    The trunk lid swings upwards when opened. Therefore, make sure that there is sufficient clearance above the trunk lid. If the trunk cannot be unlocked with the SmartKey or KEYLESS-GO, use the ...

    High-beam headlamps (halogen headlamps)
    High-beam headlamps (halogen headlamps) Switch off the lights. Open the hood. Turn housing cover 1 counter-clockwise and pull it out. Turn bulb holder 2 counter-clockwise and pull it out ...

    Blind Spot Assist
    Important safety notes Blind Spot Assist uses a radar sensor system to monitor the areas on both sides of your vehicle. It supports you from speeds of approximately 20 mph (30 km/h). A warning ...