Checking the oil level using the oil dipstick
Example: vehicles with a gasoline engine
Example: vehicles with a diesel engine
– Park the vehicle on a level surface.
To check the oil level with the engine at
operating temperature, switch the engine
off and wait for approximately five minutes.
– Pull oil dipstick 1 out of the dipstick guide
tube.
– Wipe off oil dipstick 1.
– Slowly slide oil dipstick 1 into the guide
tube to the stop, and take it out again.
If the level is between MIN mark 3 and
MAX mark 2, the oil level is correct.
– If the fuel level has sunk to MIN mark 3 or
below, add 0.55 to 1.1 US qt (0.5 to 1.0 l)
engine oil.
See also:
Example: step 1 to 3
The following table shows examples on how to calculate total and cargo load
capacities with
varying seating configurations and number and size of occupants. The following
examples use
a load lim ...
Tires
30 Use of snow chains not permitted. Observe the notes in the "Snow chains"
section.
31 MOExtended tires (tires featuring run-flat characteristics) only in
combination with an a ...
Important safety notes
WARNING
Do not adjust the steering wheel while driving.
Adjusting the steering wheel while driving, or
driving without the steering wheel adjustment
feature locked could cause the driv ...