Automatic locking feature

The vehicle locks automatically when the ignition is switched on and the wheels of the vehicle are turning at a speed of more than 9 mph (15 km/h).

You could therefore be locked out when:
• the vehicle is being pushed.
• the vehicle is being towed.
• the vehicle is being tested on a dynamometer.

To deactivate: press and

hold button 1 for about five seconds until a tone sounds. To deactivate: press and hold button 1 for about five seconds until a tone sounds.
button 2 for about five seconds until a tone sounds. To activate: press and hold button 2 for about five seconds until a tone sounds.

buttons and If you press one of the two buttons and do not hear a tone, the relevant setting has already been selected.

You can also switch the automatic locking function on and off using the on-board computer.

    See also:

    Vehicle
    Display messages Possible causes/consequences and Solutions You have attempted to start the engine with the transmission in position R or D. Shift the transmissio ...

    System self-test
    After you have switched on the ignition, the system carries out a self-diagnosis. WARNING A malfunction in the system has been detected if one of the following conditions occurs: the indi ...

    Speed rating
    The speed rating is part of the tire identification. It specifies the speed range for which the tire is approved. ...