Resetting to factory settings

For safety reasons, the Daytime Running Lights: function in the Lights submenu is only reset when the vehicle is stationary.

– Press the button on the or steering wheel to select the Settings button on the steering wheel to select the Settings menu.
– Press the button to select the or Factory Setting submenu. button to select the Factory Setting submenu.
– Press the The Reset All Settings? message button to confirm.
The Reset All Settings? message appears.
– Press the button to select or No or Yes. button to select No or Yes.
– Press the selection. button to confirm the selection.
If you select Yes, the multifunction display shows a confirmation message.

    See also:

    Example: step 1 to 3
    The following table shows examples on how to calculate total and cargo load capacities with varying seating configurations and number and size of occupants. The following examples use a load l ...

    TIREFIT kit version 2
    ► Pull connector 4 with the cable and hose 5 out of the housing. ► Screw hose 5 onto flange 6 of tire sealant bottle 1. ► Insert tire sealant bottle 1 head downwards into re ...

    Parking lamp/standing lamp
    Switch off the lights. Open the hood. Remove the headlamp cover (). Left-hand headlamp: detach the washer fluid reservoir (). Turn housing cover 1 counter-clockwise and pull it out. Pul ...