Activating the HOLD function

– Make sure that the activation conditions are met.
– Depress the brake pedal.

– Quickly depress the brake pedal further

– Quickly depress the brake pedal further until HOLD display 1 appears in the multifunction display.
The HOLD function is activated. You can release the brake pedal.

If depressing the brake pedal the first If depressing the brake pedal the first time does not activate the HOLD function, wait briefly and then try again.

The vehicle's brakes are applied when the WARNING
The vehicle's brakes are applied when the HOLD function is activated. For this reason, deactivate the HOLD function if the vehicle is to be set in motion by other means (e.g. in a car wash or by towing).

    See also:

    Deactivating the HOLD function
    The HOLD function is deactivated automatically if: • you accelerate and the transmission is in position D or R. • you shift the transmission to position P. • you apply the brakes again with a ...

    Important safety notes
    For reasons of safety, Mercedes-Benz recommends that you drive with the lights switched on even during the daytime. In some countries, operation of the headlamps varies due to legal requirements a ...

    Overview of sun visors
    WARNING Do not use the vanity mirror while driving. Keep the vanity mirrors in the sun visors closed while the vehicle is in motion. Reflected glare can endanger you and others. 1 Mirror li ...