Changing the settings of the lockingsystem
You can change the setting of the locking system in such a way that only the driver's door and the fuel filler flap are unlocked. This is useful if you frequently travel on your own.
► To change the setting: press and hold
down the 
buttons
simultaneously for approximately six
seconds until the battery check lamp flashes twice.
If the setting of the locking system is
changed within the signal range of the
vehicle, pressing the 
button
locks or unlocks the vehicle.
The SmartKey now functions as follows:
► To unlock the driver's door: press the
button once.
► To unlock centrally: press the
button twice.
► To lock centrally: press the
button.
The KEYLESS-GO function is changed as follows:
► To unlock the driver's door: touch the
inner surface of the door handle on the
driver's door
► To unlock centrally: touch the inner
surface of the door handle on the frontpassenger
door or the rear door.
► To lock centrally: press the locking
button
on one of the door handles.
See also:
Opening and closing the side
windows
1. Front left
2. Front right
3. Rear right
4. Rear left
The switches for all side windows are located
on the driver's door. There is also a switch on
each door for the corresponding ...
Neutral N with ECO start/stop function
activated
The ECO start/stop function switches the
engine off automatically if the vehicle is
braked to a standstill when in neutral N and
the brake is still depressed.
For further information on the ECO ...
Warranty
The Service and Warranty Information
booklet contains detailed information about
the warranties covering your vehicle.
Your authorized Mercedes-Benz Center will
exchange or repair any defective ...