Cleaning the trailer tow hitch
The ball coupling must be cleaned if it becomes dirty or corroded.
- Remove rust on the ball of the ball coupling, e.g. with a wire brush.
- Remove dirt with a clean, lint-free cloth or a brush.
- After cleaning, lightly grease the ball of the ball coupling again.
- Check that the vehicle's trailer tow hitch is working properly.
Observe the note on care provided by the trailer manufacturer.
You can also have the maintenance work on the ball coupling and the trailer
tow hitch carried out by a qualified specialist workshop.
Environmental note
Dispose of rags soaked in oil and grease in an environmentally responsible manner.
See also:
Engine
Display messages
Possible causes/consequences and
Solutions
The coolant level is too low.
Add coolant, observing the
warning notes when doing so.
If coolant nee ...
Driver's knee bag
Driver's knee bag 1 provides additional
protection for the driver against:
- knee injuries
- thigh injuries
- lower leg injuries
Driver's knee bag 1 deploys below the
steering wheel. During ...
Setting the rear-compartment airflow
using the front control panel
Turn the SmartKey to position 2 in the
ignition lock.
Activate the rear compartment
function via COMAND.
The rear-compartment climate control can
be controlled via the front control panel
...