Removing/attaching the washer fluid reservoir

You must remove the washer fluid reservoir from the engine compartment before you can replace the bulbs in the left-hand headlamp.

  • To detach: turn catch 2 counterclockwise.
  • Swing washer fluid reservoir 1 far enough to the side to allow the bulbs of the headlamp to be replaced.
  • To attach: swing back washer fluid reservoir 1.
  • Turn catch 2 clockwise.
    See also:

    Cleaning the exhaust tail pipes
    Impurities combined with the effects of road grit and corrosive environmental factors may cause flash rust to form on the surface. You can restore the original shine of the exhaust tail pipe by cl ...

    Checking the coolant level
    Only check the coolant level when the vehicle is on a level surface and the engine has cooled down. Turn the SmartKey to position 2 in the ignition lock. On vehicles with KEYLESS-GO, press th ...

    Important safety notes
    We recommend that all infants and children be properly secured in an infant or child restraint system at all times while the vehicle is in motion. The use of seat belts and infant and child r ...