Adjusting the seats
Vehicles without Memory function: the seats can be adjusted within three minutes
of a front door being opened.
The time period starts over again if, within these three minutes, you:
- open or close a front door
- insert the SmartKey into the ignition lock or remove it from the ignition lock
- switch the ignition on or off
If the SmartKey is in position 2 in the ignition lock, the seats can be adjusted at any time.
Depending on the equipment, the seat adjustment buttons are either located on the side of the seat or on the door control panel.
- Seat cushion angle
- Seat height
- Seat fore-and-aft adjustment
- Backrest angle
- Seat cushion angle
- Seat height
- Seat fore-and-aft adjustment
- Backrest angle
- Head restraint height
You can store the seat settings using the memory function ().
See also:
Starting procedure with the SmartKey
To start the engine using the
SmartKey
instead of KEYLESS-GO, pull the Start/Stop button out of the ignition lock.
Turn the SmartKey to position 3
in the
ignition lock and release it as
so ...
Increased vehicle weight due to
optional equipment
This is the combined weight of all standard
and optional equipment available for the
vehicle, regardless of whether it is actually
installed on the vehicle or not. ...
Problems with the SmartKey
Problem
Possible causes/consequences and
Solutions
You cannot lock or unlock the vehicle using the
SmartKey.
The SmartKey battery is discharged or nearly discharged.
- ...