Releasing seat belts
- Press release button 4() and guide belt tongue 2 back towards belt sash guide 1.
Make sure that the seat belt is fully rolled up. Otherwise, the seat belt or
belt tongue will be trapped in the door or in the seat mechanism. This could damage
the door, the door trim panel and the seat belt. Damaged seat belts can no longer
fulfill their protective function and must be replaced. Consult an authorized Mercedes-
Benz Center.
See also:
Cruise control lever
1 To switch on or to increase the speed
2 To switch on or to reduce the speed
3 To deactivate cruise control
4 To switch on with the current speed or
with the last stored speed
When you ...
Checking the oil level using the oil
dipstick
Example: vehicles with a gasoline engine
Example: vehicles with a diesel engine
– Park the vehicle on a level surface.
To check the oil level with the engine at
operating temperature, swi ...
Introduction
In the DriveAssist. menu you can:
• show the distance display
• activate/deactivate ESP®
• activate/deactivate PRE-SAFE® Brake
• activate/deactivate ATTENTION ASSIST
• activate/deactivate Blind ...