Installing the towing eye

tool kit. Remove the towing eye from the vehicle tool kit.

WARNING
The exhaust tail pipe may be hot. You could burn yourself if you touch the tail pipe. Be particularly careful when removing the rear cover.

The mountings for the removable towing eyes are located in the bumpers. They are at the front and at the rear, under the covers.

Press the mark on cover 1 inwards in the

direction of the arrow. Press the mark on cover 1 inwards in the direction of the arrow.

Screw the towing eye in clockwise to the Take cover 1 off the opening.

stop and tighten it. Screw the towing eye in clockwise to the stop and tighten it.

    See also:

    Please bear the following in mind
    Resetting the service interval display A qualified specialist workshop, e.g. an authorized Mercedes-Benz Center, will reset the service interval display after the necessary service work has bee ...

    Seat belts
    Display messages After starting the engine, the red seat belt warning lamp lights up for six seconds. Possible causes/consequences and ► Solutions The seat belt warning lamp reminds the ...

    TIN (Tire Identification Number)
    This is a unique identifier which can be used by a tire manufacturer to identify tires, for example for a product recall, and thus identify the purchasers. The TIN is made up of the manufactur ...